How To Blow Up An Air Mattress Ultimate Guide 2023

Want to know how to blow up an air mattress? Check it out in this article. We are of the opinion that air mattresses are rapidly growing in popularity.

One of the most common errors we observe every day is the belief that all air mattresses can be inflated using your mouth. It’s not the case, and is a completely ineffective way to breathe, even though every airbed could be pumped by mouth.

A lot of people have purchased the airbed, but they haven’t remembered the pump needed to fill it up. In order to avoid stress, here’s How to Inflate an Air Bed without a Pump, saving the expensive purchase of a pump for emergencies. Five easy, yet inventive ways to inflate an air bed without the use of a pump.

How To Blow Up Your Vacuum-Packed Mattress Without a Pump?

If your electric pump went when you were staying at home, you shouldn’t get worried. It is possible to use every home appliance that can create an air stream that is directed –whether it’s your vacuum, snow blower, or leaf blower as well as a hair dryer you can easily fill the size of your air mattress.

Old School Method – Use Your Lungs

It is most likely the most ineffective process, which is also time-consuming and tiring. Take a deep breath, and then inhale the air out of your lungs into the bed. Do this until you are full. Make sure to stop every now and then to avoid hyperventilation.

Personally, I’d rather walk for 2 hours or ride an airplane, bus, or train to get an expensive pump, rather instead of filling up a mattress by breathing.

All of these methods can fill up an airbed with no necessity of pumping however, it is highly advised to purchase an electric or manual pump to speed up the process. However, as we know, not everything is in the camping trip.

If the unlucky event arrives and you don’t remember the pump, you’re prepared, and knowing how to pump up a mattress without a pump, you’re an inch ahead of other campers.

Use a Hair Dryer

It is possible to use hair dryers to add your mattress with air in two ways:

1. Make use of the open end of the dryer just as it is used, or
2. Attaching the top of a bottle made of plastic at the top of the dryer

Method 1 – Hair Dryer

• Begin by laying your bed on the ground.
• Make sure to connect your hair dryer with an outlet.
• Make sure your hair dryer is in a cool setting so that it blows cool air onto the mattress.
• Turn on your hair dryer, then connect the hair dryer’s end to the valve opening that is on your mattress.

Be aware that some air may escape through this process since the valve at the end of a dryer isn’t the same size as the valve that is on your mattress.

Method 2 – Hair Dryer and Plastic Bottle

• Use a plastic bottle that is large enough to fit in the hair dryer.
• Make use of scissors or a knife to cut the bottom of the bottle.
• Attach the top of the bottle to the top of your hairdryer. Its top will be able to fit snugly onto the inflatable mattress’s valve.
• Place your mattress on your floor flat.
• Make sure to connect your hairdryer to an outlet and then turn it on.
• Check that your blow air dryer is set to cool.

It is important to note that this method will not be effective if you don’t have a hair dryer that has a “cool” option. Why?

Because the hot air produced by the blow dryer melts and cause damage to the plastic bottle as well as other elements in the mattress. If your hair dryer does not have an appropriate setting for cooling then you may be able to utilize this method.

Use A Vacuum Cleaner

The vacuum method is one of the commonly widely used alternative methods of inflating your airbed with no pump. If your airbed comes with a hose connection and the ability to exhaust (or reverse function) You’re set.

Then, here’s the information you’ll need to do:

• Check that your vacuum cleaner is cleaned. Clean the dirtbag or container, and then use the vacuum for a few seconds to ensure that there’s no dirt that remains in the vacuum hose.
• Replace the standard nozzle for cleaning with a smaller one. In the event that you don’t have a nozzle that is suitable for difficult-to-access areas, utilize the hose with no nozzle.
• Lay your airbed flatly onto the flooring. This will allow for quick and even inflation.
• Attach the vacuum hose to the valve for inflation. It’s possible that you’ll need to adjust it until it’s tight enough or buy an adapter from your local hardware retailer.
• Switch on the exhaust mode and then inflate your mattress. If the model you have allows controlling the power of the stream begins with the lowest level and then increases it gradually. So, you won’t place too much strain on the seams of your mattress.

That’s it! When your mattress is completely filled then remove the hose and then close the valve.

Use the Garbage Bag

It may sound odd It may sound crazy, but it’s actually true! But it’s not as quick as the other methods discussed earlier.

• Make use of a big garbage bag if there is one as it can do the job quicker.
• Make use of scissors to make an opening on the side of the trash bag.
• Connect this end that is open to the bed’s intake valve. Attach the connection with the adhesive bandage or even duct tape, to avoid the loss of air.
• Then, trap it in all the air you can by using your hands and the open edge of the garbage bag. You can blow out the air and then put it in a smaller bag if that’s more convenient for you.
• The trapped air should be pushed into the mattress, laying in the bag of trash to reduce time.
• Repeat this procedure until you’ve filled your mattress.

This technique is best suited to larger trash bags, such as leaf, lawn or contractor’s bags since these bags are more likely to tear during the process.

Make Use Of a Manual Pump (If You Don’t Have Electric Pump)

Yes, the pump can still be a source of pump however, if you are often on hikes and bring your air mattress it can prove useful.

It is possible to use foot, hand, or bike pumps since they all do their jobs in the same way.

• Hand pump. The smallest and has the lowest air output. It’s best to use it with twin-sized airbeds for pools or pool inflatables. Connect your pump to the inflating air valve on your mattress and pump the air with your hands.
• Foot pumps. The foot pump is heavier but are also more effective. They are able to quickly fill up a full-sized airbed or even a motorboat and do not require as much effort as hand pumps do.
• Bike pump. If you own a bike at home, then you’re likely to own one too. The bike pumps can be quite heavy and can deliver the greatest amount of air when compared to foot or hand pumps, which means it is possible to quickly inflate an airbed that large.

Manual pumps do not rely on electricity. They rely on physical force to fill the mattress. Therefore, they are suitable for use outside or in locations where electricity isn’t accessible.

Use a Tire Inflator To Blow Up Air Mattresses

The tire inflator generally operates in the same manner as an air compressor however, it’s much smaller and could be slower to fill your mattress than an air compressor.

Here’s how you can make use of a tire inflation device to make an air mattress more comfortable:

• The first step is to connect the end of the inflator’s output valve to your valve for the air mattress.
• If the ends don’t align, use duct tape to secure the ends.
• Inflate your tire and wait for the air mattress to be filled.

Due to their size tire inflators can be a practical alternative due to their flexibility. It’s a useful item to have when you are an outdoors person.

Using Leaf Blower

A leaf blower is loud however it can also be handy for blowing up your air mattress. Simply put the air outlet of the leaf blower over the valve, and let the air fill up the airbed. This is slower than vacuum, however, it is quicker than the blow dryer or garbage bag methods.

It is likely that you don’t own a leaf blower at your back while camping and this method is also suitable for home use.

Here’s how:

• Set your air mattress down on your floor. It is recommended to do this in your backyard, particularly when you are using a gas-powered leaf blower.
• Attach the top of the blower’s leaf to inflate an air mattress valve.
• The ends might not be able to fit correctly however, you can use your hands to wrap the top around or create a contraption with an empty bottle of plastic to channel the air inside the mattress in a way that is effective.
• You could also connect a crevice nozzle that you have from your vacuum cleaner to the leaf blower’s nozzle to attach to an intake valve on the mattress.
• Switch on your leaf blower, and wait until your bed begins to get filled. Like the vacuum method, the process should only take only a few minutes.

So, How to Blow Up an Air Mattress Without The Use of a Bag or Pump?

Now you don’t have to be in a bind if you have to fill the airbed with the aid of a pump.

However, here’s the problem:

The hairdryer, the vacuum, and the leaf blower require power sources for operation.

If you’ve been camping, it’s likely that you’ll not have access to any source of power.

Don’t despair, though!

It’s easy to create an air bed using an ordinary garbage bag It could be an ordinary plastic bag however, you’ll need to cut the handles off to make the end that is open even.

Then, here’s the information you’ll need to do:

• The mattress should be rolled out and lay it out flat. Be sure to check the mattress for sharp objects as fixing the mattress without the use of a patch kit when the conditions of camping could be difficult.
• Inflate the bag. You can simply swing it about until it expands, then grip the open end with your hands to ensure that the air stays inside.
• The Air mattress valve should be opened and then place the bag’s opened end over it. It can be secured with rubber bands to form more of a seal.
• The air in the bag onto the mattress. The pressure will increase gradually to stop the bag from breaking. Once all the air is in the mattress, take out the bag from the mattress and stop the valve.
• Repeat this process until your mattress is filled with air. It could take some time however, eventually, the airbed will be ready for you to lie on.

It’s that simple! You now know how to blow up your mattress with no pump when camping.

Are you a fan of any of them? How was it? Perhaps you have any tips you would like to give away? You are welcome to share it in the comments section below!

How to Blow Up an Air Mattress – FAQ

Conclusion

If the above techniques seem too complicated then the best choice is to buy an air mattress that is inflatable self-inflating or built-in air bed.

This way, you will not have to think about buying a separate pump. This could cost you more than your typical airbed, but it’s worth the investment.